|
Disk Dr. Neck (NG20-M)
Disk Dr. Neck represents a new concept in the treatment of (the) herniated cervical disc.
The longitudinal expansion of the traction belt placed in the rear section is a revolutionary mechanism that greatly relieves pain and aids patient recovery.
The ergonomically designed chin collar provides comfort and (strong) support for the patient and the one touch velcro-type fasteners on both sides of the traction belt make the Disk Dr. Neck easy for anyone to use and operate unaided. Disk Dr. Neck complements other treatment programmes and helps speed patient recovery.
Wearing method:
1-Ensure that the traction belt is completely deflated. If there should be some air left,remove air by rotating the Air Release Screw counterclockwise. Then rotate the Air Release Screw clockwise before air injection.
2-Attach the one face of the Belt Adhesive Side to the one face of the Support Adhesive Side.(Air injection Nozzle should face down)
3-Put your chin on the Chin Pad of the Neck support.
(you are recommended to put a handkerchief or towel on the chin pad to absorb perspiration).
4-Attach the other face of the belt adhesive side to the other face of the Support Adhesive
Side.(It looks like wearing Disk Dr. for neck around your neck.)
5-Confirm whether the Air Release Screw of the Air Injection nozzle is tight and then link the Air Injection Tongs with the Air Release Screw.
6-Grab the head of the pump with one hand and the Pump Handle with the other hand. Then,push and pull the pump handle repeatedly to inflate the traction belt.
7-As air is injected, the traction belt will expand upward and downward.You will feel
tightening around your neck.
8-By pushing the Air Injection Tongs, remove it from the Air Injection Nozzle.
9-To unbind the traction belt, be sure to release air where the traction belt is around your neck, so that it may not be rolled up. To release air,rotate the Air Release Screw slightly counterclockwise.(you can also release air by depressing the pin in the air release screw). |
